Lapp Online Catalog: OLFLEX®-FD VFD: Continuous Flex VFD Cable with UL & CSA TC Approval
USA
Lapp Group
 
Company
Worldwide
Brands
Applications
Markets
Products

Oil Resistant Cables
Flexible Tray Cable
Continuous Flex Control Cable
Continuous Flex Data Cable
Torsional Robotic Cable
High Temperatue Flexible Control Cable
Flexible Cables for Drives, Motors, & Assemblies
Flexible Signal & Control Cable
Harmonized European Hook-up Wire, Cable & Cordage
Pendant & Reel Cable and Accessories
UL Single Core & Hook-up Wire
EPIC Rectangular Connectors
EPIC Circular Connectors
EPIC Pin & Sleeve Connectors
SKINTOP Strain Relief Cable Glands
Tubing & Sleeving

Conduit & Accessories

Cable Marking Systems
Cable Track
Lapp Systems
Technical Data
Lapp Catalog

Flexible Cables for Drives, Motors, & Assemblies

  NFPA79    
c CE
  

OLFLEX® FD VFD
Continuous Flex VFD Cable with UL & CSA TC Approval


OLFLEX® FD VFD is a continuous flex shielded motor cable for VFD Drives. It is designed with "Lapp Surge Guard" semi-conductive material to hold up to nonlinear power distortions associated with VFD drives and has an elastomeric alloy jacket for industrial applications.

Recommended Applications:
VFD drive and motor connections in continuous flex applications, Machine tool, Plastic extrusion, any on/off applications using a VFD drive and motor

Application Advantage:
• Continuous Flex rated for cable track applications
• "Lapp Surge Guard" protection to eliminate cable failure due to electrical disturbances
• Industrial Grade & Chemical Resistant elastomeric alloy jacket passing Oil Res I & II
• Corona Inception Voltage is 2900 volts
• Double shielded for extra protection
• UL TC-ER & CSA TC approved



Finely stranded bare copper conductors; specially formulated “Lapp Surge Guard” insulation; dry lubricant, barrier tape; 100% shielding with foil tape and tinned copper braid; specially formulated TPE black jacket.
    
VFD White Paper
Availability
Standard put-ups are 100ft, 250ft, 500ft, and1,000ft. Bulk reels can be cut to length
 
OR-02
FR-03
CF-01
MP-03
 

 
Minimum Bend Radius:  
  for flexible use: 5 x cable diameter
  for continuous flexing: 7.5 x cable diameter
Temperature Range: -25°C to +105°C
Nominal Voltage: 600V- TC (UL & CSA)
    1000V- TC Wind Turbine (WTTC)
Test Voltage: 7500V
Conductor stranding: Very Fine Wire, Class 6
Color Code : Three black conductors with white numbers, plus green/yellow ground
Approvals: UL: - Type TC-ER, 90ºC
  - UL DP-1 90ºC, UL AWM 105ºC
  - UL Type MTW, NFPA 79 2007
  - Oil Res I/II, Wet Rating 75ºC
  - Class 1 Div.2 per NEC Art. 336, 392, 501
      - Sunlight resistant and direct burial
  CSA: - c(UL) CIC/TC FT4
      - AWM I/II A/B FT4
    Additional: - ICEA-T-24-380, Corona test

    
 
Need a Sample?  Samplerequest
 
Find Mating Parts for your Cable
EPIC ConnectorsNeed an EPIC® Connector?    Skintop Need a SKINTOP® Strain Relief?
Enter your Cable Part #   
 
Part Number Number of Conductors
includes ground
Nominal
Outer Diameter
Approx
Weight
SKINTOP®
MS-SCL
SKINTOP®
MS-SC Brush
inches mm lbs/mft kg/km
14 AWG (105/24) 2.11 mm2
771404 4 0.500 12.7 133 198 53112340 53112676
12 AWG (128/32) 3.38 mm2
771204 4 0.575 14.6 180 268 53112350 53112676
10 AWG (192/32) 5.32 mm2
771004 4 0.677 17.2 271 403 53112350 53112677

* UL Type TC with ER stands for "exposed run" and is replacing the term "open wiring". It is a change in terminology only.

Lapp Group

© 2009 Lapp Group
Privacy
Lapp USA or the Lapp Group are not affiliated with Lapp Insulator.
Disclaimer