 |
|||||||
 |
|||||||
 |
 |
 |
 |
 |
 |
||
 |
|||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||
 |
|||||||||||||||||||||
 |
|||||||||||||||||||||
Continuous Flex Control Cable |
     |
||
OLFLEX® CHAIN 879 CY |
|||
OLFLEX® Chain 879 is a highly flexible, multi-conductor cable designed for continuous flex applications. Fine stranding, specially formulated PVC insulation and jacket compounds optimize flex life and provide excellent resistance to mineral oils, synthetic oils and water based coolants. Recommended Applications: Application Advantage: |
| OLFLEX® CHAIN 879 Construction: Finely stranded bare copper conductors; specially blended PVC/ nylon insulation; dry lubricant; conductors cabled with tape wrap; tinned copper braid (85% coverage); specially formulated UV and oil resistant PVC jacket. |
 |
Also available with blue and black conductors; minimum order required
|
|
|||||||||||||||||||||||||||||||
 |
Minimum Bend Radius for: | ||
| for continuous flexing: | 7.5 x cable diameter | ||
| with shield: | 10 x cable diameter | ||
 |
Temperature range: | ||
| for flexible use: | -5°C to +90°C | ||
| for stationary use: | -40°C to +90°C | ||
 |
Nominal Voltage: | 600V - UL/CSA |
|
 |
Test Voltage: | 3000V | |
 |
Conductor stranding: | Bare Copper, Class 6 | |
 |
Color code: | Black with numbered cores, plus green/yellow ground. (Optional-Other color codes available upon request) |
|
 |
Approvals: | UL: | - Type MTW |
| - UL AWM 2587 + 21098 | |||
| - NFPA 79 2007 compliant | |||
| - Oil Res I/II + UL 758 80ºC Test | |||
| CSA: | - CSA AWM I/II A/B FT1 | ||
| - CSA C22.2 210.2 | |||
| Additional: | Based on VDE Specifications | ||
| Conforms to CE Low Voltage Directive | |||
| * Passes Impact & Crush tests to UL 1277 excluding 20 AWG designs. Same requirement for Exposed Run. | |||
  |
|||
