|
|||||||
|
|||||||
|
|
|
|
|
|
||
 |
|||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||
 |
|||||||||||||||||||||
 |
|||||||||||||||||||||
EPIC® Pin & Sleeve Connectors |
|
KEY FEATURES |
|
 |
|
| MULTIMAX: • Patented click-lock housing • Patented integral cable grip with shade ring locking device • Patented universal membrane seal • High copper, solid brass contacts |
 |
|
|
CEE
Series: |
|
|
|
| Common Features | |
|
|
| •
Tough Type 6 Nylon Housing • Make first/break last ground contact • Voltage polarized contacts and color coded housings • Conformance to IEC 60309-1, -2; UL 1682 and 1686 approved. |
|
|
|
|
| ELECTRICAL: | |
| Dielectric Voltage Withstand | Up to 3000 volts for 1 minute |
| Maximum Working Voltage | 600 volts (North American); 690 volts (International) |
| Insulation Resistance | 5 megohms minimum |
| Overload | 150% rated current at rated voltage for 50 make/break cycles |
| Current Interrupting / Load Breaking | Tested to 125% rated current at 110% rated voltage per IEC 60309-1 clause 20 |
| Conditional
Short Circuit Current |
10k amps at rated voltage per IEC 60309-1 clause 29 |
| Endurance, Connect and Disconnect Cycles | See Table 2 |
| Ground Path Current | See Table 1 |
| MECHANICAL: | |
| Impact
Resistance (-25°C for 6 hours) |
Per UL 1682 Section 34 and IEC 60309-1 Clause 24 |
| Crush Resistance (-25°C for 6 hours) | 250 pounds for 1 minute |
| Withdrawal
Force |
See Table 4 |
| Cable Secureness | See Table 3 |
| Polarization Integrity | Maintained by oversized ground pin and "clock key" |
| Wire Size Accommodation | See Table 6 |
| Cable OD Accommodation | See Table 5 |
| ENVIRONMENTAL: | |
| Operating Temperature Range | Plugs,
Connectors, Outlets, Inlets: -25° to 70°C Interlocked Switch Outlets: -40° to 70°C |
| Flammability (self-extinguishing) | •
Contact Holders 20A & 30A (16A & 32A): Glow Wire 850°C (UL94-V2) • Contact Holders 60A &100A (63A &125A): Glow Wire 960°C (UL94-V0) • Other components: Glow Wire 650°C • ULYSSE Interlocked Switch Outlet Housing: Glow Wire 960°C (UL94-V0) |
| Moisture Resistance | •
MULTIMAX: IP44 (Indoor Splash Proof) • CEE Series: IP44 (Indoor Splash Proof); IP67 (Indoor/Outdoor Watertight) • ULYSSE: IP66 & IP67 (Indoor/Outdoor Watertight) • ALUPRES: IP55 & IP65 (Indoor/Outdoor Watertight) |
Corrosion Resistance |
External screws and cover springs are stainless steel. Contact pins for CEE Series are nickel plated brass |
Chemical Resistance |
Resists standard industrial hydrocarbons, acids, bases, and solvents |
| UV Resistance | Exposed plastic materials are UV stabilized |
|
ALL
ABOVE DATA, WHERE APPLICABLE, ARE ACCORDING TO “IEC 60309” STANDARD.
|
|
  |
© 2008 Lapp Group |
Lapp
USA or the Lapp Group are not affiliated with Lapp
Insulator. |
||||
