Warning:

1) Follow installation instructions carefully.

2) Use caution and proper safety procedures when working
    with an open flame and high temperatures.

3) Maintain a well ventilated workplace and avoid charring
    or burning product to prevent fumes that may cause eye,
    nose and throat irritation.

4) Consult M.S.D.S prior to handling or use for complete
    details.

Installation Instructions:

1) Position heat shrink tubing over object to be covered.

2) Using a heat gun, infrared heat source, soft yellow
    flame torch or oven, heat the tubing uniformly until it
    fully recovers and conforms to the object. Please
    consult the Lapp catalog or www.lappusa.com for the
    appropriate shrink temperatures.

3) If working with a long piece of tubing, start at one end
    and rotate while applying heat.

4) Avoid overheating the shrink tubing.

5) Remove the heat source and allow the shrink tubing to
    cool completely.